Xmost M12 X-coded female front mount socket provides a detachable cable interface on an industrial equipment panel. It accepts a compatible 8-pin M12 X-coded male connector, with solder terminals or pre-wired leads connecting to the internal wiring.
Select the front fastened version when it matches the panel installation drawing. Choose the unwired socket for termination during equipment assembly, or the 0.3 m pre-wired version for routing to an internal connection point.
This M12 female Ethernet socket should be selected as part of the complete wiring assembly. Confirm the required transmission performance, contact assignment and shielding arrangement for the intended equipment.
Key Features
- 8-pin X-coded female interface: Connects to a compatible M12 X-coded male cable connector.
- Unwired or 0.3 m leads: Choose customer termination or supplied pre-wired leads.
- Solder termination: Supports connection to the internal equipment wiring.
- Front fastened mounting: For panels designed around this installation arrangement.
- PG9 or M16 × 1.5 mounting: Match the panel thread to the enclosure opening.
- Numbered contact diagram: Helps engineers identify terminals and verify wiring.
- Listed electrical ratings: 0.5 A and 50 V AC / 60 V DC.
- Industrial Ethernet application: Confirm the complete assembly against the network requirements.
Product Dimensions
[Insert the front mount female socket drawing and panel cut-out drawing here.]
Illustrated PG9 Version — Dimensions in mm
| Item to Check | Drawing Value |
|---|---|
| Mating thread | M12 × 1.0 |
| Panel mounting thread | PG9 |
| Overall body length shown, excluding leads | 20 |
| Upper axial section shown | 7 |
| Middle axial section shown | 9 |
| Lower axial section shown | 2.5 |
| Upper wrench size | SW13.4 |
| Mounting nut wrench size | SW17.9 |
| Lead length | L; according to ordered version |
The mating thread connects to the external cable connector. The panel mounting thread secures the socket to the enclosure. Use the corresponding cut-out drawing for the selected mounting version.
Needle Arrangement (Front View)
[Insert the X-coded 8-pin female contact arrangement screenshot from page 23 here.]
The diagram shows the mating-face view. Follow contact numbers 1–8 when identifying solder terminals and checking the pre-wired lead assignment.
Use the female contact diagram when verifying the connection to the external male connector.
Product Specifications
| Parameter | Specification |
|---|---|
| Product type | M12 X-coded female front mount Ethernet socket |
| Mounting | Front fastened |
| Contact count | 8 pins |
| Termination | Solder |
| Wiring options | Unwired / 0.3 m pre-wired leads |
| Standard listed | IEC 61076-2-109 |
| Rated current | 0.5 A |
| Rated voltage | 50 V AC / 60 V DC |
| Wire size listed | 0.14 mm² / AWG26 |
| Shielding listed | Unshielded |
| Coupling thread | M12 × 1.0 |
| Panel mounting thread options | PG9 / M16 × 1.5 |
| Insulation resistance | ≥100 MΩ |
| Contact resistance | ≤5 mΩ |
| Recommended coupling torque | 0.4 N·m |
| Maximum coupling torque | 0.8 N·m |
| Temperature range, flexible use | −25°C to +80°C |
| Temperature range, static use | −40°C to +80°C |
| Protection ratings listed | IP67 / IP68 |
| Pollution degree | 3 |
| Insulator materials listed | PA66+GF / TPU+GF |
Applications
This M12 X-coded front mount female connector can be considered for:
- Industrial Ethernet equipment panels: Connecting an external network cable to internal wiring.
- Automation enclosures: Providing a detachable 8-contact cable interface.
- Modular machinery: Allowing the external cable to disconnect at the housing.
- Equipment harness assembly: Selecting an unwired socket or supplied leads to match production requirements.
Confirm the complete connection’s network performance and shielding requirements before selection.
Wiring and Lead Options
[Insert the wire colour and pin assignment screenshot from page 23 here.]
| Contact | Wire Colour |
|---|---|
| Pin 1 | White/orange — WH/OR |
| Pin 2 | Orange — OR |
| Pin 3 | White/green — WH/GN |
| Pin 4 | Green — GN |
| Pin 5 | White/brown — WH/BN |
| Pin 6 | Brown — BN |
| Pin 7 | White/blue — WH/BU |
| Pin 8 | Blue — BU |
The table identifies wire colours by contact number. Follow the equipment wiring specification for signal assignments and verify the contact positions against the mating-face diagram.
Ordering Information
| Wiring Option | PG9 Mounting | M16 × 1.5 Mounting |
|---|---|---|
| Unwired | 1M1207XF08HP9W00 | 1M1207XF08H16W00 |
| 0.3 m pre-wired leads | 1M1207XF08HP9W30 | 1M1207XF08H16W30 |
Example enquiry: M12 X-coded female front mount socket, 8-pin, PG9 mounting, solder termination, 0.3 m pre-wired leads.
