Xmost M12 T-coded female front mount socket provides a detachable DC power connection on a machine or control enclosure. It accepts a compatible M12 T-coded male cable connector, with solder or crimp termination connecting the socket to the internal equipment harness.
Choose the front fastened version to match the panel installation drawing. Select an unwired socket for termination during assembly, or use pre-wired leads in lengths of 0.1 m, 0.3 m or 0.5 m.
This 4-pin M12 female power socket is rated at 12 A and 60 V. Confirm the circuit requirements, contact assignment and mounting thread before ordering.
Key Features
- 12 A / 60 V DC power connection: Match the ratings to your equipment circuit.
- Solder or crimp termination: Choose the connection method used by your harness assembly process.
- Unwired or pre-wired leads: Terminate your own wires or select supplied leads for internal routing.
- 4-pin T-coded female interface: Connects to a compatible M12 T-coded male connector.
- Front fastened mounting: For panels designed around this installation arrangement.
- Three listed lead lengths: 0.1 m, 0.3 m and 0.5 m.
- PG9 or M16 × 1.5 panel threads: Select the version matching the panel opening.
- Unshielded construction: As specified for this catalogue product.
Product Dimensions
[Insert the front mount female socket drawing and panel cut-out drawing here.]
Illustrated PG9 Version — Dimensions in mm
| Item to Check | Drawing Value |
|---|---|
| Mating thread | M12 × 1.0 |
| Panel mounting thread | PG9 |
| Overall body length shown, excluding leads | 20 |
| Upper axial section shown | 7 |
| Middle axial section shown | 9 |
| Lower axial section shown | 2.5 |
| Upper wrench size | SW13.4 |
| Mounting nut wrench size | SW17.9 |
| Lead length | L; according to ordered version |
The mating thread connects to the external cable connector. The panel mounting thread secures the socket to the enclosure. Use the corresponding cut-out drawing for the selected mounting version.
Needle Arrangement (Front View)
[Insert the T-coded 4-pin female contact arrangement screenshot from page 12 here.]
The diagram shows the mating-face view. Follow contact numbers 1–4 when identifying terminals and checking the pre-wired lead assignment.
Use the equipment schematic to determine each contact’s circuit function and DC polarity.
5. Product Specifications
| Parameter | Specification |
|---|---|
| Product type | M12 T-coded female front mount DC power socket |
| Mounting | Front fastened |
| Contact count | 4 pins |
| Termination options | Solder / crimp |
| Wiring options | Unwired / pre-wired leads |
| Standard listed | IEC 61076-2-111 |
| Rated current | 12 A |
| Rated voltage | 60 V |
| Wire size listed | 1.5 mm² / AWG16 |
| Shielding | Unshielded |
| Coupling thread | M12 × 1.0 |
| Panel mounting thread options | PG9 / M16 × 1.5 |
| Insulation resistance | ≥100 MΩ |
| Contact resistance | ≤5 mΩ |
| Recommended coupling torque | 0.4 N·m |
| Maximum coupling torque | 0.8 N·m |
| Temperature range, flexible use | −25°C to +80°C |
| Temperature range, static use | −40°C to +80°C |
| Protection ratings listed | IP67 / IP68 |
| Pollution degree | 3 |
| Insulator materials listed | PA66+GF / TPU+GF |
Applications
This M12 T-coded front mount female power connector can be considered for:
- Machine DC power interfaces: Connecting an external male power cable to internal equipment wiring.
- Automation enclosures: Providing a detachable four-contact panel connection.
- Modular equipment: Allowing the external power cable to disconnect at the housing.
- Harness production: Selecting solder, crimp or pre-wired construction to match assembly requirements.
Select the version according to the circuit ratings, contact assignment and panel design.
Wiring and Lead Options
[Insert the wire colour and pin assignment screenshot from page 12 here.]
| Contact | Wire Colour |
|---|---|
| Pin 1 | Brown — BN |
| Pin 2 | White — WH |
| Pin 3 | Blue — BU |
| Pin 4 | Black — BK |
The table identifies wire colours by contact number. It does not specify positive and negative connections. Follow the equipment wiring schematic when connecting the internal harness.
Selection and Ordering
| Selection Item | Available Choices |
|---|---|
| Contact count | 4 pins |
| Mounting style | Front mount |
| Termination | Solder / crimp |
| Panel mounting thread | PG9 / M16 × 1.5 |
| Wiring | Unwired / pre-wired |
| Listed lead lengths | 0.1 m / 0.3 m / 0.5 m |
| Custom requirements | Specify wire type or lead length |
Example enquiry: M12 T-coded female front mount socket, 4-pin, solder termination, PG9 mounting, 0.3 m pre-wired leads.
