Xmost M12 A-coded female plastic PCB panel connector accepts a compatible external male cable connector and connects to the equipment’s circuit board through rear PCB contacts.
Its PG9 mounting thread secures the connector to the panel, while the M12 × 1.0 mating interface provides the external cable connection. Choose the female version when required by the equipment interface and matching cable assembly.
Six contact counts are available. Select the required conductors first, then check the corresponding current and voltage ratings. The 3–17 pin range includes different electrical limits.
Key Features
- Female A-coded connection: Accepts a compatible M12 A-coded male cable connector.
- PCB dip-solder contacts: Provides a circuit-board termination behind the equipment panel.
- 3–17 pin selection: Six contact counts for different wiring requirements.
- Plastic construction: PA66+GF screw/nut material listed in the catalogue.
- PG9 mounting thread: For attachment to the equipment panel.
- M12 threaded interface: M12 × 1.0 mating connection.
- Unshielded construction: As specified for this product version.
- Numbered female contact diagrams: Supports mating-interface and circuit checks.
Product Dimensions
[Insert the female plastic panel connector outline drawing and panel cut-out drawing here.]
Dimensions in mm
| Item to Check | Drawing Value |
|---|---|
| Mating thread | M12 × 1.0 |
| Panel mounting thread | PG9 |
| Overall body dimension shown, excluding rear contacts | 20 |
| Upper axial section shown | 7 |
| Middle axial section shown | 9 |
| Lower axial section shown | 2.5 |
| Upper wrench size | SW13.4 |
| Mounting nut wrench size | SW17.9 |
| Rear contact section dimension shown | 6 |
| Contact tip section dimension shown | 3 |
| Contact diameter, 3 / 4 / 5-pin versions | Ø1.0 |
| Contact diameter, 8 / 12-pin versions | Ø0.6 |
The 17-pin contact diameter is not specified in the outline drawing. Confirm the required detail before finalizing the equipment design.
Needle Arrangement (Front View)
[Insert only the female needle arrangement row from page 1, showing all six contact counts.]
The diagrams show the female mating-face view. Use this arrangement to check the external male connector and assign the equipment circuits.
For the 3-pin version, the populated contact positions are 1, 3 and 4.
Product Specifications
| Parameter | Specification |
|---|---|
| Product type | M12 A-coded female plastic PCB panel connector |
| Termination | PCB dip soldering |
| Standard listed | IEC 61076-2-101 |
| Shielding | Unshielded |
| Mating thread | M12 × 1.0 |
| Panel mounting thread | PG9 |
| Insulation resistance | ≥100 MΩ |
| Contact resistance | ≤5 mΩ |
| Recommended coupling torque | 0.4 N·m |
| Maximum coupling torque | 0.8 N·m |
| Temperature range, flexible use | −25°C to +80°C |
| Temperature range, static use | −40°C to +80°C |
| Protection ratings listed | IP67 / IP68 |
| Pollution degree | 3 |
| Insulator materials listed | PA66+GF / TPU+GF |
Electrical Ratings by Contact Count
| Contacts | Rated Current | Rated Voltage |
|---|---|---|
| 3 pins | 4 A | 250 V |
| 4 pins | 4 A | 250 V |
| 5 pins | 4 A | 60 V |
| 8 pins | 2 A | 30 V |
| 12 pins | 1.5 A | 30 V |
| 17 pins | 1.5 A | 30 V |
Applications
This M12 A-coded female plastic PCB connector can be considered for:
- Sensor connection panels: Receiving external male cables and connecting to internal electronics.
- Actuator control modules: Providing an equipment interface within the selected ratings.
- Industrial control housings: Mounting an external cable receptacle with PCB termination.
- Multi-contact equipment interfaces: Selecting the contact count required by the circuit design.
Check the female contact arrangement, electrical ratings and enclosure dimensions before ordering.
Selection and Ordering
| Contacts | Female Part Number |
|---|---|
| 3 pins | 1M1207AF03PP9P |
| 4 pins | 1M1207AF04PP9P |
| 5 pins | 1M1207AF05PP9P |
| 8 pins | 1M1207AF08PP9P |
| 12 pins | 1M1207AF12PP9P |
| 17 pins | 1M1207AF17PP9P |
Example enquiry: M12 A-coded female plastic PCB panel connector, 8-pin, PG9 mounting, PCB dip soldering, part number 1M1207AF08PP9P.
