Xmost M12 X-coded male 90° CAT6A connector provides a shielded network cable connection for compatible industrial Ethernet equipment. Its right-angle molded design directs the cable perpendicular to the mating axis, accommodating layouts where a straight cable exit is impractical.
This single-ended M12 Ethernet cable assembly features an 8-pin male interface and M12 × 1.0 screw locking. The catalog identifies the product for CAT6A, 10 Gbps Ethernet applications.
PVC and PUR cable options are listed in 1 m and 3 m lengths.
Key Features
- 90° right-angle cable exit for routing close to equipment.
- 8-pin M12 X-coded male interface for compatible industrial Ethernet ports.
- CAT6A cable assembly for the catalog-listed 10 Gbps Ethernet application.
- Shielded, single-ended molded construction.
- M12 × 1.0 screw locking.
- PVC or PUR cable options, with 1 m and 3 m catalog lengths.
Product Dimensions
Dimensions (mm)
| Dimension | Value |
|---|---|
| Horizontal span shown | 31.5 |
| Horizontal molded section | 18 |
| Vertical span shown | 36.3 |
| Coupling outside diameter | Ø14.5 |
| Cable-exit width shown | 12.4 |
| Maximum cable outside diameter | ≤ Ø8.0 |
| Mating thread | M12 × 1.0 |
Dimensions correspond to the marked spans in the right-angle male connector drawing. Cable length is specified separately.
Product Specifications
| Parameter | Specification |
|---|---|
| Brand | Xmost |
| Connector Size | M12 |
| Coding | X-coded |
| Contact Gender | Male |
| Contact Count | 8-pin |
| Connector Orientation | 90° Right-angle |
| Assembly Type | Single-ended molded cable assembly |
| Cable Category | CAT6A |
| Application Listed | Industrial Ethernet |
| Data Rate Listed | 10 Gbps |
| Shielding | Shielded |
| Standard Listed | IEC 61076-2-109 |
| Rated Current | 0.5 A |
| Rated Voltage | 50 V AC / 60 V DC |
| Wire Size | 0.14 mm² / AWG26 |
| Insulation Resistance | ≥ 100 MΩ |
| Contact Resistance | ≤ 5 mΩ |
| Locking Method | M12 × 1.0 screw locking |
| Recommended Tightening Torque | 0.4 N·m |
| Maximum Tightening Torque | 0.8 N·m |
| Contact Termination | Soldering |
| Dynamic Operating Temperature | −25 °C to +80 °C |
| Static Operating Temperature | −40 °C to +80 °C |
| Protection Ratings Listed | IP65 / IP67 |
| Pollution Degree | 3 |
| Insulator Material Options | PA66 + GF / TPU + GF |
Applications
Suggested applications for this M12 X-coded male right-angle Ethernet connector include:
- Industrial Ethernet systems: Connections to compatible X-coded female network ports.
- Machine communication equipment: CAT6A links between compatible network devices.
- High-bandwidth equipment links: Installations using compatible 10 Gbps Ethernet equipment.
- Compact machine layouts: Connections where nearby components restrict a straight cable exit.
- Equipment panel interfaces: Network cable routing alongside the panel through a 90° connection.
The operating data rate depends on the complete network link and connected equipment.
Selection and Ordering
Specify the cable jacket and cable length. Select the corresponding right-angle male part number from the catalog ordering table.
Check the X-coded 8-pin interface, Ethernet pin assignment and cable-routing clearance. Follow the catalog wiring diagram and maintain the specified shield connection during installation.
Reviews
There are no reviews yet.