Xmost M12 D-coded male 90° connector provides a shielded CAT5e cable connection for compatible PROFINET and industrial Ethernet equipment. Its right-angle molded design directs the cable perpendicular to the mating axis, supporting installations where a straight cable exit is impractical.
This single-ended M12 Ethernet cable assembly features a 4-pin male interface and M12 × 1.0 screw locking. PVC and PUR cable options are listed in 1 m and 3 m lengths.
Key Features
- 90° right-angle M12 connector for routing close to equipment.
- 4-pin D-coded male interface for compatible industrial Ethernet ports.
- Shielded CAT5e cable assembly for PROFINET and Ethernet connections.
- Single-ended molded construction.
- M12 × 1.0 screw-locking interface.
- PVC or PUR cable options, with 1 m and 3 m catalog lengths.
Product Dimensions
Dimensions (mm)
| Dimension | Value |
|---|---|
| Horizontal span shown | 31.5 |
| Horizontal molded section | 18 |
| Vertical span shown | 36.3 |
| Coupling outside diameter | Ø14.5 |
| Cable-exit width shown | 12.4 |
| Maximum cable outside diameter | ≤ Ø8.0 |
| Mating thread | M12 × 1.0 |
Dimensions correspond to the marked spans in the right-angle drawing. Cable length is specified separately.
Product Specifications
| Parameter | Specification |
|---|---|
| Brand | Xmost |
| Connector Size | M12 |
| Coding | D-coded |
| Contact Gender | Male |
| Contact Count | 4-pin |
| Connector Orientation | 90° Right-angle |
| Assembly Type | Single-ended molded cable assembly |
| Cable Category | CAT5e |
| Application Listed | PROFINET / Industrial Ethernet |
| Shielding | Shielded |
| Standard Listed | IEC 61076-2-101 |
| Rated Current | 4 A |
| Rated Voltage | 250 V |
| Wire Size | 0.34 mm² / AWG22 |
| Insulation Resistance | ≥ 100 MΩ |
| Contact Resistance | ≤ 5 mΩ |
| Locking Method | M12 × 1.0 screw locking |
| Recommended Tightening Torque | 0.4 N·m |
| Maximum Tightening Torque | 0.8 N·m |
| Contact Termination | Soldering |
| Dynamic Operating Temperature | −25 °C to +80 °C |
| Static Operating Temperature | −40 °C to +80 °C |
| Protection Ratings Listed | IP67 / IP68 |
| Pollution Degree | 3 |
| Insulator Material Options | PA66 + GF / TPU + GF |
| Screw / Nut Material Options | Nickel-plated brass / nickel-plated zinc alloy |
| Contact Material Options | Gold-plated phosphor bronze / gold-plated brass |
| Sealing Material Options | FKM / silicone / epoxy |
| Outer Housing Material Options | TPU / PVC |
| Cable Jacket Options | PVC / PUR |
| Catalog Cable Lengths | 1 m / 3 m |
Applications
Suggested applications for this M12 D-coded male right-angle Ethernet connector include:
- PROFINET field devices: Network connections to compatible D-coded female ports.
- Industrial automation equipment: Ethernet wiring between compatible machine modules.
- Compact machine layouts: Connections where adjacent components limit space behind the port.
- Equipment panel interfaces: Network cable routing alongside the panel using a 90° cable exit.
Selection and Ordering
Specify the cable jacket and cable length. Select the corresponding right-angle male part number from the catalog.
Match the D-coded 4-pin interface and Ethernet pin assignment to the equipment. Check cable-routing clearance and maintain the specified shield connection during installation.
Reviews
There are no reviews yet.