M12 T-coded female rear mount socket connects an external male power cable connector to the equipment’s internal DC wiring. Select the rear fastened version when the enclosure provides mounting access and clearance for the rear hardware.
Solder and crimp termination versions support different harness assembly methods. The unwired socket can be terminated during production, while pre-wired versions provide leads for routing to an internal terminal or harness connection.
Choose the panel mounting thread and lead length according to the enclosure layout. Check the four-contact assignment against the equipment schematic and matching M12 T-coded male connector.
Key Features
- Rear fastened installation: For housings designed around a rear mount power receptacle.
- Female T-coded connection: Four contacts for a compatible M12 T-coded male cable connector.
- 12 A / 60 V ratings: For DC circuits within the specified electrical limits.
- Two termination methods: Solder or crimp versions available.
- Lead length selection: Unwired, 0.1 m, 0.3 m and 0.5 m options listed.
- Two panel mounting threads: PG9 and M16 × 1.5.
- M12 threaded coupling: M12 × 1.0 mating connection.
- Unshielded design: As listed for this catalogue product.
Product Dimensions
[Insert the rear mount female socket drawing and panel cut-out drawing here.]
Illustrated PG9 Version — Dimensions in mm
| Item to Check | Drawing Value |
|---|---|
| Mating thread | M12 × 1.0 |
| Panel mounting thread | PG9 |
| Overall body length shown, excluding leads | 20 |
| Upper axial section shown | 8 |
| Flange thickness shown | 2 |
| Lower axial section shown | 9 |
| Upper wrench size | SW17 |
| Lower wrench size | SW13.4 |
| Lead length | L; according to ordered version |
Check space for rear fastening hardware and internal wire routing. Prepare the panel opening using the drawing for the ordered mounting thread.
Needle Arrangement (Front View)
[Insert the T-coded 4-pin female contact arrangement screenshot from page 12 here.]
The contact diagram is viewed from the mating face. Follow the numbered positions when checking the external male connector and internal harness connection.
Product Specifications
| Parameter | Specification |
|---|---|
| Product type | M12 T-coded female rear mount DC power socket |
| Mounting | Rear fastened |
| Contact count | 4 pins |
| Termination options | Solder / crimp |
| Wiring options | Unwired / pre-wired leads |
| Standard listed | IEC 61076-2-111 |
| Rated current | 12 A |
| Rated voltage | 60 V |
| Wire size listed | 1.5 mm² / AWG16 |
| Shielding | Unshielded |
| Insulation resistance | ≥100 MΩ |
| Contact resistance | ≤5 mΩ |
| Recommended coupling torque | 0.4 N·m |
| Maximum coupling torque | 0.8 N·m |
| Temperature range, flexible use | −25°C to +80°C |
| Temperature range, static use | −40°C to +80°C |
| Protection ratings listed | IP67 / IP68 |
| Pollution degree | 3 |
| Insulator materials listed | PA66+GF / TPU+GF |
Applications
This M12 T-coded rear mount female power socket can be considered for:
- DC-powered equipment housings: Connecting external cables to the internal power harness.
- Control enclosures with rear mounting access: Accommodating fastening hardware behind the panel.
- Pre-wired machine assemblies: Routing supplied leads to an internal connection point.
- Modular automation equipment: Providing a detachable four-contact power interface.
Select the rear mount version according to installation access, internal wiring space and circuit requirements.
7. Wiring and Lead Options
[Insert the wire colour and pin assignment screenshot from page 12 here.]
| Contact | Wire Colour |
|---|---|
| Pin 1 | Brown — BN |
| Pin 2 | White — WH |
| Pin 3 | Blue — BU |
| Pin 4 | Black — BK |
Follow the equipment schematic for DC polarity and circuit functions. Verify the contact numbering against the female mating-face diagram before connecting the internal harness.
Selection and Ordering
| Selection Item | Available Choices |
|---|---|
| Mounting style | Rear mount |
| Termination | Solder / crimp |
| Panel mounting thread | PG9 / M16 × 1.5 |
| Wiring | Unwired / pre-wired |
| Listed lead lengths | 0.1 m / 0.3 m / 0.5 m |
| Custom requirements | Specify wire type or lead length |
Example enquiry: M12 T-coded female rear mount socket, 4-pin, crimp termination, M16 × 1.5 mounting, unwired.
